xa-mont

 

nulizhang

 Do you how to go into Windows before PCU 50 booting into SINUMERIK?

I search the Siemens manual for you, but I did not find it.try step like the following:

Power up PCU50, when you see display SINUMERIK  (reversed /or call highlighted) quickly use down key \|/ move the highlight bar one line lower (under SINUMERIK), THEN PRESS "Enter" key

HMI will go into the Service display. Select the Option " Going to Widows with SINUMRIK environment" (I cannot remember exact words, but you will see something like that. Select that number (such as 2) , if the system asks you password, input SUNRISE, then don't do anything, until the system goes into Windows. depending your OS is Win NT or Win XP , you will find what you looking for

 All good. I worked it out.

For future reference for anyone, here's what was required:

-Power up machine
-Wait for the "sinumerik 810d" splash screen with the version in the bottom right
-Press "3" on the numpad
-you will be prompted for a password, and there's an option to start windows. enter "sunrise" as the password and go into windows (needs a mouse)
-You're now just in a windows environment and you set your IP and folder sharing as per normal windows procedure. ***Apparently on some machines there will be a "machine network" and a "corporate network" or something like that. DONT CHANGE THE MACHINE NETWORK*** (mine only had one ethernet interface, so no idea on the accuracy of that, it's just something I saw elsewhere.)

Good morning.

Having some issues with this on an Huron VX12 with 810D PCU50, I hope someone can help.

1 - What is the user name at this logon? Every time I reach it, I overwrite it with '33333'

3- Is the pass "sunrise" or "SUNRISE"? I can't get to input lowercase on the machine keyboard and an external keyboard is not recognised at this stage.

Thanks in advance,

Best regards

------------------------------------------------------------------------------------------
Split from 810D PCU50 Ethernet setup

What concerns file exchange between PCU 50 and external computer you can find useful information in this thread:

https://support.industry.siemens.com/forum/WW/en/posts/how-to-shared-folder-and-load-file/291729#post1121180

I dont understand where you try to enter password?

To enter letter in lover case in HMI Advanced use Key "Shift".

And one more thing: keyboard starts to work after BIOS have run up.