Glad to meet you again! 1st of all how about your 2nd hand 802D machine, which we discussed 2 months ago. Give some feedback that may help some other  people. 

Now about this topic. I don't understand your question??!!!

Please let me know what you want--to help me understand! 

I give you some tips--

Your 2nd hand 802D control connected to your milling machine, now everything working good now.

You made data back up which saved inside 802D control , you want that data transfer to outside.???

e_skazem

Hello again

is it possible send a full back up milling machine SINUMERIK 802D by PROFIBUS Servo Drive?

Thanks

SKAZEM CNC

------------------------------------------------------------------------------------------
Split from Enable & Disable Axis in SINUMERIK 802D.

My mother tongue is Not English, but I always try to make my writing in better understanding way.

Unfetteredly, I have hard time to understand your writing in English. For you question I some times understand less than 50% some times 70% and using my sense to guess the rest.   

However --I said "glad to meet you again and want to you shared information about your Retrofit machine with 802D controlled " --I don't see you answer my that question. so please response for my question--(I copied from your another topic, which I answered you) 

" But if you want to disappear A axis from the screen, try to MD20070[4]=0 and cycle the power to see" ----this is my suggestion for you in that topic ---did you try and if it working?--Answer me , please. 

Do you know your answer will also help other users in this forum and I think if you answer , that will help ME to continue help you

Now Let me guess what you want --

You want someone send to you " Milling Backup ( startup data + alarm text + PLC Sample Prog with Tool Box )" 

I don't know my guessing is good or no. 

e_skazem

Hello

Thanks for your answer

I want a milling CNC Machine with 2nd hand SINUMERIK 802D + SIMPDRIVE 611 ( digital Control ) for each Axis.

Servo Control card is : 6SN1118-1NH01-0AA0 connect to CNC control by PROFIBUS module :  6SN1114-0NB00-0AA2 & I want use analog Setpoint for Spindle Speed control .

Unfortunately SINUMERIK 802D have Turning Soft & I'm try find Milling Backup ( startup data + alarm text + PLC Sample Prog with Tool Box ).

Best regards

SKazem CNC