Dear members,

I'm new to this software.

I need to configure EM-277 profibus DP module in Micro/win software, How to configure this, i tried to add this module in wizards but I'm not getting this module in Wizard tree.

Please give solution how to configure EM-277 profibus DP module in MICRO/WIN SOFTWARE.Please give a link of video or file or program file.

Please do the needfull.

Thank you

tp123@4

Dear members,

I'm new to this software.

I need to configure EM-277 profibus DP module in Micro/win software, How to configure this, i tried to add this module in wizards but I'm not getting this module in Wizard tree.

Please give solution how to configure EM-277 profibus DP module in MICRO/WIN SOFTWARE.Please give a link of video or file or program file.

Please do the needfull.

Thank you

 Hello,

 Please read this post below:

 https://support.industry.siemens.com/tf/WW/en/posts/how-to-configure-em-277-expansion-module-with-s7-200-plc/109090?page=0&pageSize=10

 and

  https://support.industry.siemens.com/cs/document/2615830/how-can-you-communicate-data-between-the-s7-200-and-the-s7-300-via-profibus-dp?lc=en-WW

hello,

whether i need to add any gsd. file in microwin, if so how to add in micro/win software.

because i have not seen any em277 module in wizards.

how i will get to know em277 module has been configured?

Give any sample program such that module has been configured.

I got to know there is no hardware configuration because of ribbon type connection is it correct?

Please clarify me.

Thank you

tp123@4

hello,

whether i need to add any gsd. file in microwin, if so how to add in micro/win software.

because i have not seen any em277 module in wizards.

how i will get to know em277 module has been configured?

Give any sample program such that module has been configured.

I got to know there is no hardware configuration because of ribbon type connection is it correct?

Please clarify me.

Thank you

 Hello,

 but you have read above? You no need to configure in 200 side just vw area to exchange data, there is also an example above, what you have in the other side as Master?

 https://emacsan.wikispaces.com/file/view/s7200_em277.pdf

 other examples

 https://support.industry.siemens.com/tf/ww/en/posts/read-variables-though-em277/72113/?page=0&pageSize=10

https://support.industry.siemens.com/tf/WW/en/posts/cpu313c-2dp-and-cpu224-via-profibus-dp/102203?page=0&pageSize=10

Thank you, it clears most of my doubt.

But In "MICRO/WIN" software anywhere we will get to know module has been added or configured?

as it shows in simatic manager hardware configuration.

If Yes, where i can find in software.

Thanks 

tp123@4

Thank you, it clears most of my doubt.

But In "MICRO/WIN" software anywhere we will get to know module has been added or configured?

as it shows in simatic manager hardware configuration.

If Yes, where i can find in software.

Thanks 

 Hello, 

 you not see the module in Microwin, just to connect the module and perhaps you will see the led of the module, look the Table A-20 of the previous FAQ

Hello,

as Ste sugested. Your S7-200 acts always as DP Slave, so you must configure for first your Master (f.ex. S7-300/400), import S7-200 EM DP module GSD (look to S7-300/400 HW module library in Syep7 v5.x) and configure I/O buffer there. Via this configuration you can then use V memory in S7-200, it will be reserved for DP communication. Functionality of EM DP module you can see in MicroWin menu -> PLC->Information.