Skip to Content

Register Login

工业业务领域支持中心

Technical Forum

Navigation

Backlash compensation variable in Simotion

Created by: Genn123 at: 6/27/2022 6:06 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

6/27/2022 6:06 AM	Rate (0)
Genn123 Bronze Member Joined: 8/21/2014 Last visit: 8/10/2022 Posts: 118 Rating: (1)	Hi, Is there anyway to edit backlash compensation value via variable in simotion. Currently, we are writing the compensation value in mechanics page of the corresponding axis. But for this exercise programming software is needed(scout). Is there another way to change this variable by operator via web page or software?

Suggestion To thank Quote Answer

6/27/2022 10:08 AM	Rate (0)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 8/9/2022 Posts: 3944 Rating: (617)	Motion Control Basic Functions > Programming with Technology Objects > Programming technology objects (TOs) > Configuration data
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Genn123

6/27/2022 5:13 PM	Rate (0)
Genn123 Bronze Member Joined: 8/21/2014 Last visit: 8/10/2022 Posts: 118 Rating: (1)	How the backlash acts during a restart. Suppose the last movement direction of axis was reverse before switching off the machine.When we switch on the machine, from which movement backlash will get applied? Suppose we are moving the axis in forward direction after a switch on - Will the axis moves with backlash value + actual set Point ? Or the backlash will be applied after a positive or negative movement

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on