Hello Everyone, 

i have here Inverter from  SEW EUROPE  Type: MDX61B0005-5A3-4-0T   //  Interface: DFE32B 

my PLC : CPU 1512SP F-1 PN  

the communication is via Profinet .

• can some1 tell me what the meaning of this Type MDX..... and that interface: DEF....

• Can some1 help me step by step and explain to me how and from where i begin . 

i want to send the Controlword from my PLC to my SEW 

and i want to recive the Statusword from SEW TO PLC 

i use  Tia portal v14 SP1  Update 9 

and Movitools motion Studio 

thanks in advance 

Maybe SEW's own sample projects can help you out with this.

http://seweurodrive.com/support/software_result.php?woher=index&software_produkt=&software_nutzung=3&software_gruppe=12

Sibrand

Maybe SEW's own sample projects can help you out with this.

http://seweurodrive.com/support/software_result.php?woher=index&software_produkt=&software_nutzung=3&software_gruppe=12

 Thanks for ur advice 

honestly i read some documents and i tryed some .. at the end i can control the Position and 

the max speed and the mini-speed .. but i can't make the Motor Takt or i cant send the full word what i need... honestly i am lost with that ( i am beginner ) thats why i am looking here for expert kind person maybe can help me with that . 

Inv0ker

Hello Everyone, 

i have here Inverter from  SEW EUROPE  Type: MDX61B0005-5A3-4-0T   //  Interface: DFE32B 

my PLC : CPU 1512SP F-1 PN  

the communication is via Profinet .

• can some1 tell me what the meaning of this Type MDX..... and that interface: DEF....

• Can some1 help me step by step and explain to me how and from where i begin . 

i want to send the Controlword from my PLC to my SEW 

and i want to recive the Statusword from SEW TO PLC 

i use  Tia portal v14 SP1  Update 9 

and Movitools motion Studio 

thanks in advance 

 i just found the answer for the first Question 

the meaning of this Type MDX..... and that interface: DEF.

( in case some1 readed this ) 

You need DFE32B module on SEW drive, take a look picture :

The MOVIDRIVE®MDX61B inverter enables you touse the DFE32B option to connectto higher-level automation, project planning and visualization systems via Ethernet(PROFINET/IO protocol) thanks to its powerful, universal fieldbus interface. You canuse option DFE32B to communicate directly with the inverters via Ethernet and operatethe MOVITOOLS®MotionStudio software to change parameters and IPOSplus®programs. An integrated Web server makes itpossible for the user to access diagnosticvalues quickly and easily using a standard browser (e.g. Internet Explorer)

SOble

You need DFE32B module on SEW drive, take a look picture :

The MOVIDRIVE®MDX61B inverter enables you touse the DFE32B option to connectto higher-level automation, project planning and visualization systems via Ethernet(PROFINET/IO protocol) thanks to its powerful, universal fieldbus interface. You canuse option DFE32B to communicate directly with the inverters via Ethernet and operatethe MOVITOOLS®MotionStudio software to change parameters and IPOSplus®programs. An integrated Web server makes itpossible for the user to access diagnosticvalues quickly and easily using a standard browser (e.g. Internet Explorer)

 Can you give me the Datasheet name 

thanks in Advance 

 Once you inserted GSD file you can use this function to read data to the destination DataBlock. Just make sure your data block is fileld with appropriate size of bytes

A     #commAlarm
JC    ERR

L     P##startAddress
LAR1
L D [ AR1 , P#2.0 ]
LAR1


LAR2  P#DBX0.0
L     #dbSize
COM:  T     #LoopCounter

L PIB [ AR1 , P#0.0 ]

A     #commAlarm
JC    ERR


OPN   #db
T B [ AR2 , P#0.0 ]

+AR1  P#1.0
+AR2  P#1.0

L     #LoopCounter
LOOP  COM

BEU

ERR:  LAR1  P#DBX0.0

OPN   #db

L     #dbSize
RST:  T     #LoopCounter
L     b#16#FF
T D [ AR1 , P#0.0 ]
+AR1  P#1.0
L     #LoopCounter
LOOP  RST

 P#1500.0 was my start address in my hardware configuration for my device. You need to place yours and you will find it inside hardware configuration once you insert data from GSD /GSDML file