Hi all

I want to change all the default Hex format to Decimal format on TIA V13? 

Thank all

 Hi huggy_d1

huggy_d1

In your example, portal is doing what you asked it to do.

You declare a tag as byte, word, dword, it assumes they are not integer values, so it displays as hex.

If however you use, SINT (byte sized integer), INT (word sized), DINT (dword sized), it will default to decimal / integer values.

It will change it everywhere you would monitor the values.

I believe that is what you asked for...

You can also copy the BYTE/WORD/DWORD values to SINT/INT/DINT values for local display/monitoring with move instructions. 

aubaoquoc

Hi all

I want to change all the default Hex format to Decimal format on TIA V13? 

Thank all

 

hi aubaoquoc,

read and understand what huggy_d1 wrote.

If you want to see all values decimal, you have to declare them in integer-format.

It is a characteristic of byte/word/dword to be written in hex and its a characteristic of Int- values to be written decimal.

regards,

aubaoquoc

Thank you for your comments, maybe you or I have not understood

Here I want to change the default setting to Decimal all Network

Your comment have only manually changed each value to Decimal

But I figured out the following:

Right click on the white space in the network -> Modify ---> Display format for network -> whatever you choose (Ex: Automatic / Decimal / Hexadecimal / Floating point)

 ok, I found some differences between V13 and V14 or/and CPU S7-1200/S7-300

testet with V13 and a S7-300 PLCSIM:

-it is possible to rigth-click in the network: Modifiy -> Display format for Network -> Automatic, Decimal, Hexadecimal, floating-point

-it is possible to rigth-click on a variable: Modifiy -> Display format -> Automatic, Decimal, Hexadecimal, floating-point

tested with V14 and a S7-1200 PLCSIM and S7-300:

the drop-down-menu differs:

-it is possible to rigth-click in the network:  Display format -> Tag, Network or Block -> Automatic, Decimal, Hexadecimal, floating-point

Tag is only possible when a Tag is marked.

So with V14 you can also choose the display format for each Tag

hope this helps,

regards,