Dear all

 I am using a open controller CPU 1515s + PC . I.e. PLC & scada within single controller.

Every thing is k except the USB port , actually CPU is not able to detect monitor whereas mouse and keyboard are working fine also I check monitor with other PC CPU there it's working fine.

Can anyone can tell why it's not working with open controller.

Hi

Can you check whether USB port is enabled or not

If you connect USB, device manager detecting it or not!

Vijay

javed88

 I am using a open controller CPU 1515s + PC . I.e. PLC & scada within single controller.

Every thing is k except the USB port , actually CPU is not able to detect monitor whereas mouse and keyboard are working fine also I check monitor with other PC CPU there it's working fine.

Hi

Is it the screen itself or the touch portion ?If the touch part is not working you may need to install a driver

Eric

The USB port is working and the monitor is having touch as it's working fine with normal PC CPU.

Actually the problem is with the open controller which comes with 32bit OS as I checked the same with 64 bit OS memory card nd the touch is working fine.

Is there any way to make it working with 32 bit OS memory card.