Hello friends:
I am working with a Panel PC "PC 477 15" Touch" and I have to update it. The problem is that I write below:

The panel pc is programmed with "Wincc Flexible 2008 SP2" but on my PG I have to installed the "Wincc Flexible 2008 SP3". The file that I currently have is done with SP2, then when I go to open the file the software tell my if I want to convert to SP3, for this, the question is the next:

If I press to the "yes button" and I work with the new file on SP3 and after I go to download the Panel, Will I have problems with the panel? or Can I to convert the file SP2 to SP3 and after donwload to de panel pc without problems?

If someone could to help me I would thank him/her.

Thank you!!!!

Hello, normally it should work after upgrading.

But it depends on your Operating System on your panel PC. With newer version it could be possible

to upgrade the OS. With WinC flexible a setup for upgrading is also on the DVD. 

Hi,

If you do not get a problem, you can not answer but in principle it should work.

Regards,

Towome

New question published by PiedraRoja is split to a separate thread with the subject Problem with the migration from wincc 2008 to tia portal 11.

Best regards
Jen_Moderator