Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

What's going on here in meet and talk?

Created by: meridian88 at: 1/31/2006 5:47 PM (15 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

1/31/2006 5:47 PM	Rate (0)
meridian88 Member Joined: 8/31/2005 Last visit: 11/7/2024 Posts: 4 Rating: (0)	What's going on here in meet and talk?

Suggestion To thank Quote Answer

2/1/2006 9:55 AM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	At the moment not much [:)]

Suggestion To thank Quote Answer

11/22/2006 4:13 PM	Rate (0)
Fredex2 Regular Member Joined: 11/22/2006 Last visit: 3/29/2023 Posts: 7 Rating: (0)	Can be!![:P]

Suggestion To thank Quote Answer

4/17/2007 9:09 AM	Rate (0)
Bilal Moolla Posts: 133 Rating: (9)	Hi Guys / Gals My name is Bilal Moolla. I'm from South Africa. I am currently working at siemens in south africa in the automation brakdown services I&S. Hope to learn from you guys and make new friends. Kind regards Bilal Moolla bilal.moolla@siemens.com
Bilal Moolla Posts: 133 Rating: (9)
Suggestion To thank Quote Answer

4/17/2007 9:49 AM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	Welcome Bilal, If you have any questions, feel free to ask. with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

5/14/2007 9:26 AM	Rate (0)
Bilal Moolla Posts: 133 Rating: (9)	Hi Fred , Salma, Meridian88, Ikkezelf I am working in the A&D Hotline at the moment. I was busy with a few projects upgrades (S5 to S7 conversions). Currently I am trying to assist with technical queries using assist. . So what do you guys do? Kind Regards Bilal Moolla
Bilal Moolla Posts: 133 Rating: (9)
Suggestion To thank Quote Answer

5/15/2007 3:58 PM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	Hi Bilal I used to work for for Siemens but have now moved on elsewhere. I still haunt the forum occasionally, mainly the Simatic WinCC one. Good luck with Assist Cheers Salma

Suggestion To thank Quote Answer

5/15/2007 4:09 PM	Rate (0)
Bilal Moolla Posts: 133 Rating: (9)	Hi Salma I am about to go home. I am busy with a WinCC project. I have set my PG as the Scada screen. I have comms with the PLC but the actual tags associated to the relavant pictures does not appear. The communication from the CP343-1 Advanced card to the Scada computer seems to be the problem. I am playing around with the station configurator editor, to try and make the project work. Where are you loacted Salma?
Bilal Moolla Posts: 133 Rating: (9)
Suggestion To thank Quote Answer

5/16/2007 10:35 AM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	I'm in the UK. I hope you got your comms sorted. Try the Solutions tab in Assist, it should give you some ideas on where to look. Salma

Suggestion To thank Quote Answer

5/16/2007 12:57 PM	Rate (0)
Bilal Moolla Posts: 133 Rating: (9)	Hi Salma I tried that but unfortunately there were no solutions in there . He brought his Siwarex U Module to us with his program. I have retrieved his project. I was unable to view the Siwarex module as I did not have Siwarex U and Siwatool U installed on my machine. We managed to get the software emailed to us from Germany. After Installing the software. I have created a new project and added his Siwarex module to the project. Initailly we had all a system fault on the Siwarex module and on the CPU. After connecting a load cell to the module our errors in the diagnostic buffer were reduced from 4 to 2. So we bridged channel 1 and 2 together. and that removed all the errors and the SF on the Siwarex was removed as well. 3. Appearantly all channels have to be connected? His Siwarex module was perfect.
Bilal Moolla Posts: 133 Rating: (9)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on