How to configure between my Redundant CPU 412-5H and DCS
Created by: mprakash at: 3/11/2015 10:34 AM (6 Replies)
Rating 
Thanks 0
7 Entries
| 3/11/2015 10:34 AM | |
|
Posts: 5 Rating:
|
Dear All, I have Redundant CPU 412-5H configuration system. i have to communicate 3rd party device (DCS). how to configure between my Redundant CPU 412-5H and DCS. Is required any module/software for that configuration. Note: I have interface with my I/O module through PROFINET. Regards, M.Prakash
------------- |
Last edited by: Min_Moderator at: 3/11/2015 11:26:24 AMNew subject after splitting |
|
| 3/11/2015 8:41 PM | |
|
Posts: 3093 Rating:
|
Hello Mprakash, Regards, |
| 3/12/2015 1:01 PM | |
|
Posts: 5 Rating:
|
Dear sir, I am going to use Modbus TCP/IP protocol between my CPU 412-5H & DCS. Best Regards, M.Prakash |
| 3/12/2015 1:32 PM | |
Joined: 9/27/2006 Last visit: 9/14/2025 Posts: 12408 Rating:
|
Hello Prakash; Have a look at the following FAQ.
and follow the links that point to :
Modbus/TCP
RED V2
Hope this helps, Daniel Chartier |
| 7/26/2015 11:39 AM | |
Joined: 8/28/2013 Last visit: 6/23/2025 Posts: 1 Rating:
|
Is this with integrated PN interface or via CP 443-1 |
| 7/27/2015 11:17 AM | |
|
Posts: 3093 Rating:
|
Here you can find an overview of the libraries: https://support.industry.siemens.com/cs/ww/en/view/103709414
Regards, |
Follow us on