9/15/2021 12:35 PM | |
Joined: 12/18/2014 Last visit: 6/10/2024 Posts: 33168 Rating: (4098)
|
With the TIA project and the LOGO! program that you uploaded at last is a by me a simulation without problems possible. See attached screen video. AttachmentSimulation KP400 with LOGO! 0BA8.Standard.zip (246 Downloads) |
9/15/2021 12:43 PM | |
Joined: 5/25/2020 Last visit: 3/16/2024 Posts: 32 Rating: (0) |
i can not make it work. maybe I should buy a new logo and try. |
9/15/2021 12:47 PM | |
Joined: 5/25/2020 Last visit: 3/16/2024 Posts: 32 Rating: (0) |
I have tried to factory set my logo but I can not. should I not be able to? it says logo is not supported |
9/15/2021 12:52 PM | |
Joined: 5/25/2020 Last visit: 3/16/2024 Posts: 32 Rating: (0) |
maybe it's some setup on my pc that prevents it from working |
9/15/2021 1:00 PM |
|
Joined: 5/25/2020 Last visit: 3/16/2024 Posts: 32 Rating: (0) |
|
Last edited by: perhvid at: 09/15/2021 13:09:32 |
|
9/15/2021 1:08 PM | |
Joined: 5/25/2020 Last visit: 3/16/2024 Posts: 32 Rating: (0) |
Attachmentpoolstyring 2.zip (217 Downloads) |
9/15/2021 2:13 PM | |
Joined: 12/18/2014 Last visit: 6/10/2024 Posts: 33168 Rating: (4098)
|
I tested your HMI project, also no problem to simulate. Then make some optical changes. You can see the result in attached screen video. Good luck ... AttachmentSimulation KTP400 with LOGO! 0BA8.Standard.zip (285 Downloads) |
Follow us on