6/12/2011 1:36 PM | |
Posts: 103 Rating:
|
dear expert in siwarex u ST1 AND ST2 WHAT these indicate |
6/12/2011 4:45 PM | |
Joined: 5/28/2008 Last visit: 9/9/2024 Posts: 4515 Rating:
|
Hello, These Leds are indicate the status for channel 1 or 2. You can configure each led when to be lit using Siwatool. According to section 3-7 of this manual:SIWAREX U (One and Two-Channel Model) MLFB 7MH4601-XXXX, you can configure each led to trigger for one of the following:
Hope this helps. |
Ayman Elotaify |
|
6/12/2011 10:24 PM | |
Joined: 10/10/2010 Last visit: 4/28/2024 Posts: 307 Rating:
|
dear ayman how are you? thank you for this full reply |
This contribution was helpful to
1 thankful Users |
Follow us on