hi

i have a problem with uploading from station to PG . i connect with virtual machine (VM ware) through industrial ethernet directly to station (S7-4145h). while i open the "node selection" window in can find the PLC but i can't upload ( attachment NO.1 )

i get "Error NO 33:16662 online: the connection to the target module cannot be established"

i set my main operation system(windows 8) network adapter IP address in range 172.16.3.106

i set the virtual machine network adapter to physical network adapter

i set the Virtual network Operation system adapter IP address in range 172.16.3.105

the PLC IP address is 172.16.3.141

what is the problem , can anyone help me ?

Error6662

hi

i have a problem with uploading from station to PG . i connect with virtual machine (VM ware) through industrial ethernet directly to station (S7-4145h). while i open the "node selection" window in can find the PLC but i can't upload ( attachment NO.1 )

i get "Error NO 33:16662 online: the connection to the target module cannot be established"

i set my main operation system(windows 8) network adapter IP address in range 172.16.3.106

i set the virtual machine network adapter to physical network adapter

i set the Virtual network Operation system adapter IP address in range 172.16.3.105

the PLC IP address is 172.16.3.141

what is the problem , can anyone help me ?

 Hello Error6662,

first welcome to the forum.

check that the configuration and the actual hardware configuration match.

and perhaps the below link help you.

https://support.industry.siemens.com/tf/ww/en/posts/station-upload-problem/34545/?page=0&pageSize=10

Regards

hag010

Hello,

Check Rack and Slot numbers.  By default there are 0 and 2 accordingly. 

Best regards,

Hristo Mihalev

UMENCHO

Hello,

Check Rack and Slot numbers.  By default there are 0 and 2 accordingly. 

Best regards,

Hristo Mihalev

 first , thank you for help

according to my attachment it is ok and set 0 - 2 ;)

hag010

 

Error6662

hi

i have a problem with uploading from station to PG . i connect with virtual machine (VM ware) through industrial ethernet directly to station (S7-4145h). while i open the "node selection" window in can find the PLC but i can't upload ( attachment NO.1 )

i get "Error NO 33:16662 online: the connection to the target module cannot be established"

i set my main operation system(windows 8) network adapter IP address in range 172.16.3.106

i set the virtual machine network adapter to physical network adapter

i set the Virtual network Operation system adapter IP address in range 172.16.3.105

the PLC IP address is 172.16.3.141

what is the problem , can anyone help me ?

 Hello Error6662,

first welcome to the forum.

check that the configuration and the actual hardware configuration match.

and perhaps the below link help you.

https://support.industry.siemens.com/tf/ww/en/posts/station-upload-problem/34545/?page=0&pageSize=10

Regards

hag010

 than you for helping me

according to your link , i try with Step7->Display acessible nodes

i can see the blocks but none of them wont open ! :S
do have any suggestion ?
thank you

check the pg/PC settings in windows control center

checjk that plcsim is running correctly

check that you use TCP/IP for connection, not mpi or dp

hello 

CPU 414-3 type thıs smatıc manager v5.6 

PLC IP adres 192.0.0.2

PC IP :192.0.0.100

SET PG/PC GbE famıly con. TCPIP.1 or TCPIP Auto 

fault code:33:16662 

Good day all, 

Please am having an issue simulating simatic manager with Plcsim on my laptop, it displays the error message below. Anyone with idea on how to resolve it should please assist. 

Thanks...