Have TP1900 TiaV13sp1 project with Audit Trail.

Recipe view is configured with check-box "modify mode" under general/recipe data set.

Variables have GMP active and changes from I/O field boxes in other pages of the TP got logged correctly.

But if I change the values of the same variables from inside "Recipe view", nothing got in the logfile.

How can I track operators that modify variables in the recipe view, if nothing appears in logfile ?

Am I missing something ?

Hello ovsrl,

in the document "GMP-compliant configuration in WinCC Comfort / Advanced (TIA Portal)" (see GMP_WinCC_Advanced_V14) it is described on page 17:

• Select the "ColorSelection” recipe (1).
• In the "Inspector window” open "properties” (2).
• In the area navigation, click on "Good Manufacturing Practice” (3).

I hope you can find the setting in your WinCC Adv V13 SP1, too.

Regards,

Frink

Yes, it was already checked in my recipe.

But doing so I got recorded if somebody switches to another record of the recipe, saves, uploads or downloads.

I mean: I got logged only the commands "dataset changed" or "dataset saved" etc.

But nothing is logged (old value, new value, who, when) if the values in the table are manually changed by the operator !

Any ideas?

Have you found a solution for your problem. I have the same problem. If the recipe is changed and saved, I don't want to know which parameter in the audit trail will be changed.

Thanks

Frederik

Hello dogusmg,

at first welcome to the forum.

This is a english speaking forum. Please be so kind and write your next posts in english.
Thanks.

Google translate

Hello, I have the same problem. Please help me

HI everyone,

sorry...do you find a solution? I have the same problem :-(

thanks a lot,

BR,

Rinaldo

Hello

does anyone know a solution to this problem?

Siemens still have this big problem! Is not that difficult to understand that it's a MUST to audit the chages in the values inside a recipe control.

We are facing this problem in our plant and what we are doing is to erase the recipe control box and put each value in a separate I/O field, each control button (save, erase, new recipe...).

Hope Siemens will solve this issue. But still not solved in TIA V18...