Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

4-20mA to 6-144 inches using AM2

Created by: SiemensForumUser1 at: 5/2/2024 1:35 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/2/2024 1:35 PM	Rate (0)
SiemensForumUser1 Joined: 4/1/2024 Last visit: 10/24/2024 Posts: 6 Rating: (0)	I am trying to scale an analog sensor that is set up for an output of 6inches to 144 inches. on a 4-20mA signal. The closest thing I can get is my gain set at .14 and my offset set at 6 but that makes my min 6 and my max 146. I have a analog amplifier in front to scale from 0 to 1000 then the next scales from the numbers above. but I cant get it to the desired numbers.

Suggestion To thank

5/2/2024 1:42 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/19/2024 Posts: 34240 Rating: (4263)	Please don't post multiple for the same problem.

Suggestion To thank

5/3/2024 4:02 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	Closed cause question posted twice. The second thread with the subject4-20mA to 6-144 inches using AM2 is published within the conference LOGO! - Hardware. Best regards, Jen_Moderator

Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on