Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can I configure SIWAREX MS without SIWATOOL MS?

Created by: aleks at: 10/24/2006 3:57 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

10/24/2006 3:57 PM	Rate (0)
aleks Posts: 9 Rating: (0)	Hi, people! How can I configure SIWAREX MS without SIWATOOL MS? I need view and change data record DS3. As I understood, with library “MicroScale” I can’t view and change some data records. Help me, please.
aleks Posts: 9 Rating: (0)	Last edited by: aleks at: 10/24/2006 3:57 PM
Suggestion To thank Quote Answer

10/24/2006 4:14 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/19/2024 Posts: 8770 Rating: (1171)	Hi aleks, I think it's possible when you use the mentioned library. Here is the manual: http://support.automation.siemens.com/WW/view/en/22600601 Look at chapter 8 for more information. Have you seen the following example: http://support.automation.siemens.com/WW/view/en/22605342 Hope this will help you. Best regards, Wizard

Suggestion To thank Quote Answer

10/24/2006 4:49 PM	Rate (0)
aleks Posts: 9 Rating: (0)	Thanks for answer. But… I read manual and downloaded examples, and I didn’t find information in manuals, helps, examples and FAQs. Standard library “MicroScale” doesn’t give access to ALL data records of SIWAREX MS. In examples adjustment weight is constant, which configured once by SIWATOOL MS. I need to change adjustment weight only by CPU, without SIWATOOL MS. Example: User enter some value of adjustment weight, not only one constant value that entered by SIWATOOL MS. How can I do it?
aleks Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

10/25/2006 2:41 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/19/2024 Posts: 8770 Rating: (1171)	Hi aleks, I must admit, you're right. It isn't possible to change the adjusment weights. They are defined with Siwatool. You can only validate them. Unfortunately I don't have a solution, perhaps someone else has one. Best regards, Wizard

Suggestion To thank Quote Answer

10/28/2006 11:40 PM	Rate (0)
dzeezz Bronze Member Joined: 10/23/2006 Last visit: 11/11/2024 Posts: 48 Rating: (1)	I have also such a problem that you cna't get on change all DR in Siwarex MS. anyoneknow howexample how to get increased resolution proces value? or mayby how to get ASCII process value?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on