Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MAG 8000 Flowmeter

Created by: jmorenoc at: 12/9/2006 2:03 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/9/2006 2:03 AM	Rate (0)
jmorenoc Posts: 2 Rating: (0)	I am the owner of 16 MAG 8000 flowmeters, 8 of them came with european units (flow m3/h and volume m3) the rest of them came with different units (flow m3/h and volume Gx100). I bougth a hardwarekey and tried to change units with flowtool software. Itook outlabel with old units butI cantactivate the european units in LCD display (m3/h and m3).any suggestion?
jmorenoc Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

12/9/2006 2:43 PM	Rate (0)
jmorenoc Posts: 2 Rating: (0)	Are thereany trick in the software flowtool or fisical jumper to close? Thanks in advance for your advice.
jmorenoc Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

12/13/2006 2:31 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi it´s described in the Manual. If You don´t have the manual here is the link http://support.automation.siemens.com/WW/view/en/19730095 See chapter 4 Merry Christmas
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on