Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with connection PC->LOGO

Created by: pac at: 7/9/2006 1:13 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/9/2006 1:13 PM	Rate (0)
pac Posts: 2 Rating: (0)	>Please control this on your PC and your Logo. >On the Logo. >Logo is on. >The Transfer cable is connected on the Logo and on the PC. >On the display of the Logo must stay “Logo<->PC” how i can put my logo 230RC Logo <->PC? my Main menu is Program Card setup start where i can find “Logo<->PC"? this is the first use the display no program press ESC help me Please help me Pac
pac Posts: 2 Rating: (0)	Last edited by: CS Moderator at: 7/9/2006 1:52 PM splitted thread
Suggestion To thank Quote Answer

7/10/2006 9:47 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/12/2024 Posts: 8768 Rating: (1170)	Hello pac, Perhaps the following link will help You: http://support.automation.siemens.com/WW/view/en/21961313 Best regards, Wizard

Suggestion To thank Quote Answer

7/11/2006 5:23 PM	Rate (0)
pac Posts: 2 Rating: (0)	[:(]the problem was com1 port on my notebook. I have tried to install logo comfort on a new PC e everything is Ok. thank you Pac [:)]
pac Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on