Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

HOW CAN I FORCE THE DEFINED PULSES TO SFB47

Created by: samkcr at: 7/8/2010 2:00 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/8/2010 2:00 PM	Rate (0)
samkcr Bronze Member Joined: 3/24/2009 Last visit: 8/7/2023 Posts: 406 Rating: (3)	Hi, I am using SFB47 to read the count value from the linear encoder.In my application(stacker& reclaimer )i have to force some pulses valueto the count value at some particular instance.But i am not able to force.While making the cpu stop to run the count value is getting zero.How can i rectify this ?
	All is well :-)
Suggestion To thank Quote Answer

7/8/2010 3:38 PM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	Hello, Look at How can you retain the counter value of counter modules (6ES7350-1AH03-0AE0, 6ES7350-2AH00-0AE0, 6ES7450-1AP00-0AE0) after a STOP to RUN transition of the CPU?

Suggestion To thank Quote Answer

7/21/2010 3:03 PM	Rate (0)
samkcr Bronze Member Joined: 3/24/2009 Last visit: 8/7/2023 Posts: 406 Rating: (3)	Hi Thanks & sorry for the late reply. I found the link which is fully based on FM modules.But i am using CPU313C module to count the pulses.So for this case how can i proceed ? In SFB47 block using Job Id & Job value is it possible to force the particular count value ?
	Last edited by: samkcr at: 7/24/2010 12:10 PM All is well :-)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on