6/7/2024 5:38 AM | |
Joined: 12/15/2022 Last visit: 8/2/2024 Posts: 5 Rating:
|
Anyone else have any ideas oraz tips? |
6/13/2024 5:52 PM | |
Joined: 7/25/2017 Last visit: 8/16/2024 Posts: 316 Rating:
|
You've chosen some fairly bleeding edge technologies. Having said that, the selection looks good (to me). However, some important notes: You must choose S210 (New) instead of S210. And you must choose the F01 safety extension option for SLS. These options will allow for the use of Basic Positioner in the drive. Don't control position from S7-1200; do it in the drive and send position setpoints from the S7-1200: https://support.industry.siemens.com/cs/us/en/view/109827474/174330469771 And they will allow for the use of SLS: https://support.industry.siemens.com/cs/us/en/view/109827474/174231692555 Now I can't recall if you will get away with a single-turn absolute encoder for your application, or you must use multi-turn. Perhaps just go for multi-turn just in case. SINAMICS S210 / S210 (New) |
Last edited by: The Helping Hand at: 06/14/2024 09:02:39Links optimized |
|
Follow us on