Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Lifebeat Monitoring

Created by: Jaapie at: 3/28/2006 9:15 AM (7 Replies)

Rating (3)

Thanks 0

8 Entries

3/28/2006 9:15 AM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 7/19/2024 Posts: 800 Rating: (63)	Hi All, For the first time I want to use Lifebeat Monitoring. So I configured it like it is written in the online Help (without configuring a OPC channel (I do not know if this is necessary). Everythning looks fine, but how is the information of a connection configured in WinCC. If I take a look at the standaard script behind the objects witch are generated in the standaard picture I can not see where he gets the information for the device state from. The only code I can find witch is making contact to a tag is: strcpy (szDeviceName, GetPropChar(lpszPictureName,lpszObjectName,"tagname")); dwData = GetTagDWordState(szDeviceName, &dwState); if ( dwState & DM_VARSTATE_NOT_ESTABLISHED \|\| dwState & DM_VARSTATE_HANDSHAKE_ERROR \|\| dwState & DM_VARSTATE_HARDWARE_ERROR \|\| dwState & DM_VARSTATE_ADDRESS_ERROR \|\| dwState & DM_VARSTATE_INVALID_KEY \|\| dwState & DM_VARSTATE_ACCESS_FAULT \|\| dwState & DM_VARSTATE_TIMEOUT \|\| dwState & DM_VARSTATE_SERVERDOWN ) But where is this tag in the tagmanagement. Do I have to do something more besides configuring the lifebeatmonitoring? Do I have to make a channel of some sort? How does the system get the diagnostic data from a device? Hope you can help, Jaap

Suggestion To thank Quote Answer

3/28/2006 10:58 AM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	Jaapie, As for the OPC Channel: You only need this when you want to monitor the OS (Operating System). As for your other question: It seems to me that the devicename should be listed within the script. And the devicetype should be "status". Did you enter a devicename within the lifebeat monitoring editor? with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

3/28/2006 11:38 AM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 7/19/2024 Posts: 800 Rating: (63)	Yes, the devicename is configured on a attribute 'Devisename'. But where are the external tags of all devices?

Suggestion To thank Quote Answer

3/28/2006 11:43 AM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	Did you already configure external tags for the devices by yourself? Seems to me that Or it uses an already configured tag Or just creates one new for the lifebeat monitoring. Or is wincc that smart and does itnot need a tag for it? I haven't used the lifebeat monitoring myself, I just use the tagquality of an external tag that I configured myself. Butwhen Salma or Nemo don't know the answer, then I will try and set it up over here and see what it does. with regards, ikkezelf
Ikkezelf Posts: 1084 Rating: (72)	Last edited by: Ikkezelf at: 3/28/2006 11:44 AM
Suggestion To thank Quote Answer

3/28/2006 11:43 AM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	Unfortunately I've not used Lifebeat Monitoring. It looks like you have to configure the OPC connection with a tag containing the computer name but I could be completely wrong ! However as it's a part of PCS7, Nemo should be able to help with this one. You could also try posting on the PCS7 forum. Just be sure to update this post with the solution when you get it [:)]

Suggestion To thank Quote Answer

3/28/2006 12:46 PM	Rate (0)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 7/19/2024 Posts: 800 Rating: (63)	Ok, I will post it also in PCS7. Any answers will be updated here also.

Suggestion To thank Quote Answer

3/28/2006 1:28 PM	Rate (1)
Nemo Posts: 3149 Rating: (171)	Hi Jaapie, in your WinCC tag management > internal tags > LBM you can find the tags for LifeBeatMonitoring. nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

3/28/2006 1:59 PM	Rate (2)
Jaapie Gold Member Joined: 1/17/2006 Last visit: 7/19/2024 Posts: 800 Rating: (63)	[:D][:D] Thanks for your reactions. With your input I have found the answer and the solution for my problem: If you add a device in the Lifebeatmonitor with e.g. the name "AS1" and select a connection over witch the server will communicate. The lifebeatmonitor makes a @AS1 tag in the channel of the connection [:o]. This is the tag witch is needed for the state of the connection. Nice [8)]!! Thank you all, Jaap
	Last edited by: Jaapie at: 3/30/2006 8:18 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on