Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SOS : HMI operation in R configuration

Created by: Shamsher at: 5/25/2006 5:16 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/25/2006 5:16 PM	Rate (0)
Shamsher Posts: 102 Rating: (3)	Hai All, I am having a Redundant connection of CPU (2 CPU 315 2 DP) so that if the master fails then the slave takes over the process. The problem is configuration of the HMI ? There are to be just one screen and the the switching of the MPI connection from masterCPU to Slave CPU is not happening. Any help would be obliging Regards Shamsher
Shamsher Posts: 102 Rating: (3)
Suggestion To thank Quote Answer

5/26/2006 9:53 AM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	I don't know why it's not working. I thought you needed RedConnect for WinCC to correctly talk to redundant PLCs. I suggest that if you do not get a response here you should contact the hotline (using the Support Requestlink at the top of the page).

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on