Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinCC with Modicon Quantum PLC

Created by: khalid at: 6/24/2006 2:43 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/24/2006 2:43 PM	Rate (0)
khalid Posts: 4 Rating: (0)	hi, i want to know what r the ways to communicate WinCC with Modicon Quantum PLC through Modbus TCP protocol.. which driver is required ? do i also need to write special functions to control the communication. Thanks in advance. Khalid
khalid Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

6/24/2006 3:24 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi modbus channel is not part of WinCC. You must buy it seperately. For further information contact: http://www.allmendinger.de/002_RK/WinCC/FrameIndex.htm => here a WinCC modbus channel can be bought. nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

6/26/2006 9:55 AM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	Another way would be to use the programmable driver if you know the Modbus protocol being used. Omniserver by Descartes is one such product - http://www.omnidssi.com It communicates to WinCC using OPC and lets you configure the protocol to the PLC.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on