1/16/2024 12:19 PM | |
Joined: 2/6/2023 Last visit: 10/31/2024 Posts: 123 Rating: (15) |
Hi, The problem is in the communication module and not in the PLC. In the CP manual: https://support.industry.siemens.com/cs/us/en/view/59187251 page 30 you can see the meaning of the LEDs. For your case: A duplicate IP address was detected after the CP was in RUN. or • Difference in the transmission medium or the duplex settings between the configuration and the current system Have a good day |
Last edited by: The Helping Hand at: 03/01/2024 09:59:27Link and text formatting optimized |
|
Follow us on