Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

problem with connection to a 230RC LOGO

Created by: jreid at: 8/6/2010 4:53 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/6/2010 4:53 PM	Rate (0)
jreid Posts: 1 Rating: (0)	luliam Hi! I have a 6ED1 052-1HB00-0BA6 LOGO plc modul, and cable 6ED1 057-1AA01-0BA0. I am trying connect with PC by cable, but a have a problem with change mode on a 'PC/Card'. In my Logo menu looks like: Program.. Card.. Setup.. Start.. Where I could chang on PC<-> Cable? On Menu 'Card..' is only Card connection, I can not find PC<->Cable. Maybe it is something wrong with my LOGO 24RC? Thanks for all helps. Wizard Dear luliam, There is nothing wrong with Logo. The Logo 0BA6 will automatically go to transfer mode. From manual: When you start the upload/download in STOP, the following display appears automatically: PC <-> Logo This happens, when you select Transfer in LogoSoftComfort. And PC connected to Logo. Best regards, Wizard I am having a similar issue with not being able to communicate with a 230RC LOGO. I can establish connection with an older series unit (without the onboard expansion port for the Text Display) but cannot get on line with the newer one. Any insight would be appreciated, thanks. Splitted from 0BA6 + cable, problem with connect to PC.
jreid Posts: 1 Rating: (0)	Last edited by: O_Moderator at: 8/9/2010 1:12 PM Last edited by: jreid at: 8/6/2010 4:54 PM
Suggestion To thank Quote Answer

8/9/2010 9:01 AM	Rate (0)
Fux Posts: 661 Rating: (123)	Do you have the latest software V6.1.12? If not, you will have to upgrade/update it.
Fux Posts: 661 Rating: (123)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on