Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

412-5H PN/DP 16#43E7

Created by: SS69283 at: 10/3/2023 12:11 PM (3 Replies)

Rating (1)

Thanks 1

4 Entries

10/3/2023 12:11 PM	Rate (0)
SS69283 Member Joined: 10/4/2020 Last visit: 11/8/2024 Posts: 21 Rating: (0)	Hi All I am Facing Same issue But PLC is having error of 16#43E7. I changed my PLC and MMC Card as well but still Same issue is there. Please Help me ------------------------------------------------------------------------------------------ Split from S7-400 which is in stop mode and EXTF and REDF led is on..
	Last edited by: Jen_Moderator at: 10/13/2023 10:38:07 New subject after splitting
Suggestion To thank Quote Answer

10/3/2023 7:14 PM	Rate (1)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 11/6/2024 Posts: 4516 Rating: (839)	SS69283 Hi All I am Facing Same issue But PLC is having error of 16#43E7. I changed my PLC and MMC Card as well but still Same issue is there. Please Help me Hello, If I remember well, this error can be triggered after aborting the link up by the master CPU. Please share the diagnostic buffer and we can assist you with the reason for that error.
	Ayman Elotaify
Suggestion To thank Quote Answer

10/4/2023 8:58 AM	Rate (0)
SS69283 Member Joined: 10/4/2020 Last visit: 11/8/2024 Posts: 21 Rating: (0)	Hey Thanks For your response, where as here i am submitting Diagnose file for reference. Attachment Diagnose.txt (492 Downloads)

Suggestion To thank Quote Answer

11/15/2023 9:15 AM	Rate (0)
SS69283 Member Joined: 10/4/2020 Last visit: 11/8/2024 Posts: 21 Rating: (0)	Issue Resolved the issue was of synchronization of both H CPU...

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jen_Moderator

|

Share this page:

Share this page on...

Follow us on