Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connection through PMU X300.

Created by: AutoGen_4898577 at: 8/22/2023 1:05 PM (5 Replies)

Rating (2)

Thanks 0

6 Entries

8/22/2023 1:05 PM	Rate (0)
AutoGen_4898577 Joined: 8/22/2023 Last visit: 8/20/2024 Posts: 3 Rating: (0)	Hello. I got the same problem with a frequency inverter 6SE7021-8EB61. I also use an usb-rs232 konverter. I want to connect through PMU X300. My settings of P700 - P703 are the same you specified. But it does not work. ------------------------------------------------------------------------------------------ Split from Problem With Connection PC - Masterdrive MC (6SE7021-OTP50-Z.
	Last edited by: Jen_Moderator at: 09/14/2023 09:44:07 New subject after splitting
Suggestion To thank Quote Answer

8/22/2023 2:29 PM	Rate (1)
Graeme Platinum Expert Joined: 6/4/2008 Last visit: 11/12/2024 Posts: 1505 Rating: (326)	Hi, if your drive parameter settings are the same then it suggests the USB-serial converter needs to be set up correctly. Find your USB device in your computer device manager and find which port it occupies (i.e. COM4) You then need to set the same port in DriveMonitor and then restart the DM software. Also, You need to make sure the "serial settings" of the USB-Serial converter are set the same, i.e. baud rate and parity. Regards, Graeme

Suggestion To thank Quote Answer

8/23/2023 9:42 AM	Rate (0)
AutoGen_4898577 Joined: 8/22/2023 Last visit: 8/20/2024 Posts: 3 Rating: (0)	hello! thank you for the fast response. i got DriveMon version V05.05.02. in my windows, device manager are the ports configurated here for the adapter com 4: baudrate: 9600 data bits: 8 parity: none stop bits: 1 flow control: none

Suggestion To thank Quote Answer

8/25/2023 8:59 PM	Rate (1)
nulizhang Platinum Member Joined: 10/17/2007 Last visit: 11/15/2024 Posts: 4074 Rating: (357)	you did not mention your cable, see attached drawing, if all good, it is also possible defective of X300 U_42b8ba0a-e0b8-4313-a524-7a2e6c8197ca hello! thank you for the fast response. i got DriveMon version V05.05.02. in my windows, device manager are the ports configurated here for the adapter com 4: baudrate: 9600 data bits: 8 parity: none stop bits: 1 flow control: none Attachment RS232 Cable_PC_to_X300.pdf (630 Downloads)
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

8/31/2023 9:44 AM	Rate (0)
AutoGen_4898577 Joined: 8/22/2023 Last visit: 8/20/2024 Posts: 3 Rating: (0)	Hello! Thank you for the answer. After checking all settings in frequency inverter and laptop, the cable was wrong. Thank you both for the help!

Suggestion To thank Quote Answer

9/1/2023 9:28 PM	Rate (0)
nulizhang Platinum Member Joined: 10/17/2007 Last visit: 11/15/2024 Posts: 4074 Rating: (357)	Thanks for your feedback You said "Thank you for the answer." --there were many answers help you, can rate or "Thanks" using the button" U_42b8ba0a-e0b8-4313-a524-7a2e6c8197ca Hello! Thank you for the answer. After checking all settings in frequency inverter and laptop, the cable was wrong. Thank you both for the help!
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on