Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Downloading to TP270 via Profibus ported through ethernet

Created by: Adonis at: 4/5/2007 8:35 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/5/2007 8:35 AM	Rate (0)
Adonis Posts: 5 Rating: (0)	Hi all, I am trying to work out if it is possible to download the configuration program for the TP270 via the following "routing". - Out from the programing PC via ethernet - Into the PLC processor via ethernet (S7-414-3 with a CP443-1 ethernet card) - From the CPU into the TP270 via the existing Profibus connection. The reason why I ask is that our TP270 is only conected to profibus not ethernet. Hope this is a clear explanation..... Thanks, Adonis
Adonis Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/5/2007 9:45 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/15/2024 Posts: 8768 Rating: (1171)	Hello Adonis, It's not possible The engineering station should be connected to Profibus or MPI. See the following link: When you use WinCC flexible: http://support.automation.siemens.com/WW/view/en/22255588 When you use Protool, it isn't possible at all: http://support.automation.siemens.com/WW/view/en/22059075 Perhaps in the future it will be possible with WinCC flexible Best regards, Wizard

Suggestion To thank Quote Answer

4/10/2007 1:13 AM	Rate (0)
Adonis Posts: 5 Rating: (0)	Thanks for letting me know Wizard. I guess for now I'll connect the TP to the ethernet network until the next release of WinCC comes out...
Adonis Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on