Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how can i see the user parameter datas in STEP7

Created by: zapotek at: 11/9/2009 9:24 PM (1 Replies)

Rating (1)

Thanks 0

2 Entries

11/9/2009 9:24 PM	Rate (0)
zapotek Posts: 23 Rating: (1)	Hello; I am trying to connect our DCS system (Foxboro I/A) with siemens sirius soft starter 3rw4434-6bc44. i achived commissioning. but i can't take any data from soft starter. I added the right gsd file of this soft str. I think the user parameter datas such as(00x0 etc..) are wrong. I prepared a step7 program and used this soft starter as a dp slave. At step7 how can i see the user parameters datas at step7? I intend to compare the user parameter datas at foxboro dcs and step7. thanks..
zapotek Posts: 23 Rating: (1)
Suggestion To thank Quote Answer

11/24/2009 12:58 PM	Rate (1)
LesPaul Posts: 467 Rating: (59)	hello zapotek, I thing the attached Example will help you. kind regards Attachment 3RW44_read DS94.pdf (339 Downloads)
LesPaul Posts: 467 Rating: (59)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on