Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to reset IOT2050 to factory state?

Created by: newshade at: 7/3/2020 11:08 AM (17 Replies)

Rating (3)

Thanks 3

Result pages:: |; 1 | 2; |

18 Entries

Entries per page: 10 | all

7/3/2020 11:08 AM	Rate (0)
newshade Advanced Member Joined: 10/29/2015 Last visit: 11/8/2024 Posts: 6 Rating: (0)	Hi guys! I have a question regarding "resetting the device to factory state", more exactly - cleaning up the eMMc after installing the OS there or reinstalling it with clean image. How can it be performed? The only idea that came to my mind was installing the clean image to eMMC once again from SD or USB but when I tried it, I got a message with no space available and the process has been broken. Any help would be appreciated!

Suggestion To thank Quote Answer

7/3/2020 11:30 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi, I haven't tried that yet to "overinstall" the clean image. But you can boot from USB/SD card and format the eMMc and then install the image again. So follow the instructions but before executing the dd command to write the image to eMMc you can do: mkfs.ext4 /dev/mmcblk1 Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

12/9/2020 4:16 PM	Rate (0)
AutoGen_4851740 Regular Member Joined: 10/19/2020 Last visit: 8/13/2024 Posts: 5 Rating: (0)	I tried to reinstall the ISO image in the eMMC and now it doesn't work. I can't get it to finish booting. I have tried putting the mMC and the STAT LED stays in red. If I remove it, the LED does not activate. I have also tried it with a USB stick.

Suggestion To thank Quote Answer

12/10/2020 7:55 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi, which instructions did you follow to install the image on the eMMc / SD card? Are you using maybe a prototype device? Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

12/10/2020 8:23 AM	Rate (0)
AutoGen_4851740 Regular Member Joined: 10/19/2020 Last visit: 8/13/2024 Posts: 5 Rating: (0)	Hi, I followed the instructions contained in the files: Install_image_eMMc_V1.0.pdf SIMATIC_IOT2050_Setting_up_V1.0.pdf At first everything was fine, except that the NODE-RED website did not load. So I directly repeated the instruction again: dd if=/home/IOT2050_Example_Image_V1.0.2.img of=/dev/mmcblk1 bs=100M conv=fsync status=progress Since then, she no longer responds. If I insert the microMC and turn it on, the STAT LED stays Red If I remove the microMC and turn it on, the STAT LED does not light or blinks fast red. As a team it is not a prototype, but it came in the box without S.O.

Suggestion To thank Quote Answer

12/10/2020 3:38 PM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	This sounds very strange. Haven't seen a blinking red STAT LED yet. Did you try another SD card yet? Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

12/10/2020 4:03 PM	Rate (0)
AutoGen_4851740 Regular Member Joined: 10/19/2020 Last visit: 8/13/2024 Posts: 5 Rating: (0)	I transferred the ISO image with Dis32DiskImage in Windows several times and have also tried it from Ubuntu, I also tried it with a USB stick with the same result.

Suggestion To thank Quote Answer

12/10/2020 4:12 PM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi, do you have an UART cable (e.g this) to establish a serial connection? Then we could check what it going on. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

12/10/2020 5:32 PM	Rate (0)
AutoGen_4851740 Regular Member Joined: 10/19/2020 Last visit: 8/13/2024 Posts: 5 Rating: (0)	Right now I don't have any, but I'll find one and try. Thank you.

Suggestion To thank Quote Answer

12/18/2020 3:34 PM	Rate (0)
AutoGen_4851740 Regular Member Joined: 10/19/2020 Last visit: 8/13/2024 Posts: 5 Rating: (0)	Hi, I have already been able to connect with the UART cable. The result is as follows: SIMATIC IOT2050 SE-Boot Version: D01.00.00.09-0-g9827cee9-0x0000 BuildDate: 20200317 SYSFW ABI: 2.9 [version: 19] [19.12.1-v2019.12a (Terrific Lla] AVS@[1100 1200 1200] ======================= Board: IOT2050-ADVANCED Serial: M8BF5385 MLFB: 6ES7647-0BA00-1YA2 UUID: 647EFEA9240A49D2ACAD83787CBC52A6 A5E: A5E452229880AA04 MAC[0]: e0-dc-a0-d7-96-f0 MAC[1]: e0-dc-a0-d7-96-f1 Initlialzing DDR ...done. SKU: SE Loading PK... ok PK count: 00 PK version: 00 SV: 00-00 Security ID 0x5125e53f-0x842e215d Security policy: soft Loading image... Loading image... Loading image... Loading image... NOTICE: BL31: v2.1(release):v2.1-421-g996d37930-dirty NOTICE: BL31: Built : 20:04:56, Mar 18 2020 I/TC: I/TC: OP-TEE version: 3.6.0-16-ge260ea8d-dev (gcc version 8.3.0 (Debian 8.3.0-2)) #1 Wed Mar 18 20:08:49 UTC 2020 aarch64 I/TC: Initialized U-Boot SPL 2019.01-V01.00.00.2-0-g8e86139 (Mar 18 2020 - 20:04:56 +0000) Trying to boot from SPI Using 'conf-iot2050-advanced' configuration ## Verifying Hash Integrity ... sha256,rsa4096:custMpk+ OK ## Checking hash(es) for Image u-boot ... sha256+ OK ## Checking hash(es) for Image iot2050-advanced.dtb ... sha256+ OK U-Boot 2019.01-V01.00.00.2-0-g8e86139 (Mar 18 2020 - 20:04:56 +0000) Model: Siemens IOT2050 Advanced Base Board DRAM: 2 GiB MMC: sdhci@4f80000: 1, sdhci@04FA0000: 0 Loading Environment from SPI Flash... SF: Detected w25q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB OK In: serial Out: serial Err: serial Net: eth0: pruss0_eth Hit any key to stop autoboot: 0 ====== uuid conflict check begin ====== switch to partitions #0, OK mmc1(part 0) is current device switch to partitions #0, OK mmc0 is current device resetting USB... USB0: Register 2001040 NbrPorts 2 Starting the controller USB XHCI 1.10 USB1: Register 2001040 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus 0 for devices... 3 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Device 0: unknown device Device 1: unknown device Device 2: unknown device uuid conflict: 88c13384-a6c4-4c29-93da-0b25e8de2e06 ====== uuid conflict check end ====== Please, How do I have to reinstall the S.O.?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC IOT2050 System

Follow us on