Issues when deleting SMI DATA on Sinamics S110.

Hello, friends. I'm experiencing issues while trying to delete the SMI DATA from a Cliq encoder drive on Sinamics S110 (data and FW version in the screenshot).

When I input the value [30] "Delete SMI data" in p4691, the parameter value changes to [38] "Delete SMI data not permitted for component" (screenshot). The manual suggests the following advice for error 38: "- Set the correct component number (p4690 >= 200)." However, no matter what value I enter in p4690 =>200, the message "12: Selected component not available or not connected" is displayed. I've tried all values from 0 to 399. The only value that elicited the message 38 was p4690 = 2, as indicated in the drive_unit1/overview tab, pointing to component SMI10. I believe p4690 shouldn't be a value >=200 because S110 has only one DriveCliq input and shouldn't require addressing a value >=200, but I acknowledge I may be mistaken. Nevertheless, I'm unable to execute p4691 = 30.

Could it be an issue related to the firmware version of the CU305 DP being used? Or is it possibly a parameter set incorrectly? Can someone please assist me?

In this attachment, there are the device details and firmware version.

Device version: SINAMICS S110 CU305 DP
FW version: 4.4.0.19
Int. Supplied vers.: 4402338


Starter release: V5.5.0.1

ChristophD

id >= 200 have components if no project with topologie is loaded 

if the project is loaded then the components have the id form the project <200

which FW Version you use on the CU305?

Device version: SINAMICS S110 CU305 DP
FW version: 4.4.0.19
Int. Supplied vers.: 4402338

thanks, chrystoph