Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

KP8F

Created by: AMMS2 at: 4/26/2024 1:20 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/26/2024 1:20 PM	Rate (0)
AMMS2 Joined: 7/11/2023 Last visit: 8/28/2024 Posts: 1 Rating: (0)	Hi, I am new to automation world. Supposed that there's a machine in a factory that running, and key panel KP8 already installed and working previously. I need to replace the KP8F key panel due to broken. Is it enough for me to just set the IP address of a new key panel KP8F as the old one and swap it with the broken one? Will this work?

Suggestion To thank Quote Answer

5/3/2024 12:14 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/15/2024 Posts: 14176 Rating: (1774)	Hello AMMS2 there is no HMI program on the Key Panel. You use it as an IO device. How to program the key panel here is an example: https://support.industry.siemens.com/cs/de/en/view/63482149 Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on