Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Micromaster 440: Communicating with PLC via PROFIBUS

Created by: WitsCJY at: 7/4/2007 2:11 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/4/2007 2:11 PM	Rate (0)
WitsCJY Posts: 1 Rating: (0)	We are students currently working on the south african leg of the siemens cyber junkyard 2007. we would like some help with regards to the communicating with a micromaster 440 via profibus dp with a simatic C7 through step7. we are, at present, having problems with communicating between the devices. the hardware setup requires a module to be added to the micromaster, and we are unable to find out what module we have been given to add into the simulation. help would be appreciated WitsCJY
WitsCJY Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

7/5/2007 7:23 AM	Rate (0)
GJohn Posts: 112 Rating: (10)	The MM440 requires a CB15 profibus module: 6SE6400-1PB00-0AA0 to communicate to the PLC via PROFIBUS
GJohn Posts: 112 Rating: (10)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on