Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

s7-200+op7 programming

Created by: denon at: 10/1/2006 9:13 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/1/2006 9:13 PM	Rate (0)
denon Posts: 1 Rating: (0)	hi, i have a siemens s7-200 and 0p7 plc panel. i want to make a simple system for exemple; i give to some information form op7 when press f1,f2,f3... (press f1 then i give to name code, press f2 then i give to part code). so how to do this. how to programming my op7. please help me..
denon Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/2/2006 6:18 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi, are you using WinCC flexible or Protool?? http://support.automation.siemens.com/WW/view/en/1143019 (chapter 5.3.3) http://support.automation.siemens.com/WW/view/en/14188898 http://support.automation.siemens.com/WW/view/en/16807371 http://support.automation.siemens.com/WW/view/en/41561 For S7-200 and some other panels there are good examples in the net (if you are interested in some practical applications as well) http://support.automation.siemens.com/WW/view/en/21063460 http://support.automation.siemens.com/WW/view/en/21063595 http://support.automation.siemens.com/WW/view/en/21061963 http://support.automation.siemens.com/WW/view/en/22354065 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

10/3/2006 8:55 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/15/2024 Posts: 8768 Rating: (1171)	Hello, Because you have an OP7, you are using Protool Here is a manual of the OP7: http://support.automation.siemens.com/WW/view/en/1145112 A communication manual, with a description of connecting a S7-200: http://support.automation.siemens.com/WW/view/en/1137086 Hope this will help. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on