Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

selection more subprograms via screen and cursir keys

Created by: luciferC4 at: 3/20/2007 1:16 AM (2 Replies)

Rating (2)

Thanks 0

3 Entries

3/20/2007 1:16 AM	Rate (1)
luciferC4 Bronze Member Joined: 1/25/2006 Last visit: 11/6/2024 Posts: 257 Rating: (60)	Hi, Is it possible to make more program for Logo and in the same time transfer in Logo and than select one via screen and cursor keys? For instance, I must programming four mode of work for one machie: automatic, manual, adjusting, and simulation. Can I choose one of them via cursir keys? Or if it is not possible, can I set flegs (M bits in memory of Logo) via cursor keys? Can you explane me how if it is possible? Thanks a lot. Zoran

Suggestion To thank Quote Answer

3/21/2007 12:43 PM	Rate (1)
Fux Posts: 661 Rating: (123)	Hi, it is possible. If you don´t want to wire switches you can use - the cursor keys (upper half of the attached program) or - softkey (lower half of the attached program). The explanationfor the user is displayed in the message texts. Is that the answer to your question? Attachment Test_.zip (1021 Downloads)
Fux Posts: 661 Rating: (123)
Suggestion To thank Quote Answer

3/22/2007 9:12 AM	Rate (0)
luciferC4 Bronze Member Joined: 1/25/2006 Last visit: 11/6/2024 Posts: 257 Rating: (60)	Yes, it is OK. Thank you for help.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on