Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Variable temperature threshold

Created by: galbs at: 3/31/2015 5:10 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

3/31/2015 5:10 PM	Rate (0)
galbs Regular Member Joined: 12/1/2014 Last visit: 9/27/2023 Posts: 11 Rating: (0)	This is the situation: I've need to reach a temperature (60°) so i used a threshold value switch (on:0 off:60). The problem is that when i switch off the heating and the temperature decreases (-0.1°) it switch on immediately again. Instead i'd like to reach 60° but wait for when it goes down to 59° before to switch heating on again. Is it possible with Logo?

Suggestion To thank Quote Answer

3/31/2015 5:36 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/6/2024 Posts: 34147 Rating: (4254)	So perhaps? Attachment hysteresis.png (277 Downloads)

Suggestion To thank Quote Answer

3/31/2015 6:06 PM	Rate (0)
galbs Regular Member Joined: 12/1/2014 Last visit: 9/27/2023 Posts: 11 Rating: (0)	Perfect! Thank you! (Now i feel an *** )

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

3/31/2015 6:20 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/6/2024 Posts: 34147 Rating: (4254)	Or this solution. Attachment hysteresis2.png (256 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on