Navigation
messing around 1212C+SM1231 with 2-wire 4-20mA analog input
Created by: reimond at: 6/15/2010 9:19 PM (1 Replies)
Rating 
Thanks 0
2 Entries
| 6/15/2010 9:19 PM | |
|
Posts: 3 Rating:
|
Also messing around 1212C+SM1231 with 2-wire 4-20mA analog input. Did wiring according to diagram found bottom of page: http://support.automation.siemens.com/CN/llisapi.dll?func=cslib.csinfo&objId=40914972&nodeid0=10805065&nav0=index&load=treecontent&lang=en&siteid=cseus&aktprim=0&objaction=csview&extranet=standard&viewreg=CN For scaling used help from this page: https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid=42087579&caller=view  Sensor output is 4mA at the moment, but IW98 (used AI1 input) shows value 3530 (not 5529.6).Is there something wrong with wiring diagram? Or where could be mistake? Splitted from Anolg module problems. |
Last edited by: O_Moderator at: 6/17/2010 7:59 AMnew subject after splitting |
|
| 6/17/2010 10:20 PM | |
Joined: 9/23/2005 Last visit: 11/11/2024 Posts: 4351 Rating:
|
Hi, try to use this blocks: /tf/WW/en/Posts/31698 |
|
Denilson Pegaia |
|
Follow us on