Hello everybody

I want to make ethernet TCP/IP communication between plc 1200 siemens and HMI samkoon , the condition to make this communication is to check "authorise PUT/GET function to exchange data"

But in property of the cpu i didn't find where can i check this option(normally i find it in protection sub menu in property of cpu) but it doesn't appear

Hello,

which PLC and which FW exactly?
This settings is not available on older S7-1200 PLC versions.

Regards

Christoph

Hello,

in this version the option is not avaiable, for S7-1200 the option is available since V4.x

Older versions have enabled Put/Get all the time .

Regards

Christoph

 I am not sure whether it may be the cause, btw did you enable the PUT-GET function in SIEMENS PLC S7-1200?

Thanks,

Jay

narove

Hello I want to make tcp/ip ethernet communication between 1200 plc and samkoon hmi but I got error msg which is:handshake failed

What does mean this msg and how can I solve it?

Hi,

Handshake fail is normally a failure between two partners that tries to establish a connection.

What protocol does the HMI use to connect to the plc?

Does it have a specific 1200 plc driver?

They may be connected with ethernet tcp/ip and the hmi samkoon has 1200 siemens connection device driver we must choose it in communication parameter in order to hmi know the device which will be connected with

Unfortunately no data transfer between them

Does your non-Siemens HMI support symbolic addressing?  If not, you need to configure your DBs used by the HMI as absolute. 

narove

They may be connected with ethernet tcp/ip and the hmi samkoon has 1200 siemens connection device driver we must choose it in communication parameter in order to hmi know the device which will be connected with

Unfortunately no data transfer between them