Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

6FX2001-5QN13 Absolute encodeur Profinet

Created by: AutoGen_7754518 at: 8/12/2023 9:27 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/12/2023 9:27 AM	Rate (0)
AutoGen_7754518 Joined: 8/12/2023 Last visit: 10/7/2024 Posts: 9 Rating: (0)	Hello, I received a new siemens profinet 16 bit absolute encoder. But the old one is not the same. On the old siemens profinet absolute encoder, is it 13 bits? But, the name siemens 6FX2001-5QN13 is same... I search on the TIA for a new ESD file... but, does not exist... With the new 16 bit 6FX2001-5QN13, I cannot use the default value of the increment in the technoloy module. I need to use 8/1. And when I turned off the machine... I lost the absolute value... Does anyone have a solution? Thanks ! Attachment IMG_0666.jpeg (505 Downloads)

Suggestion To thank Quote Answer

8/15/2023 1:48 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/8/2024 Posts: 5935 Rating: (815)	Hello, you have to change the settings at the TO. https://support.industry.siemens.com/cs/ww/en/view/109486133
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

8/19/2023 1:14 PM	Rate (0)
AutoGen_7754518 Joined: 8/12/2023 Last visit: 10/7/2024 Posts: 9 Rating: (0)	Thank you. I had found this information but I haven't tried it yet. The program was in V15, I imported it in V17. I also noticed that the V17 UPD 6 version fixes a lot of problems. So I installed the UPD6 version. Is DSGML 2.35 in the V17 Upd6 patches? I also downloaded the new V17 HSP library to have the new components. In order to have the latest CPU firmware, and I download the 2.35 GSDML On the other hand, I don't understand why with 8/1 instead of 65536/1 I could read the encoder angle. Greetings.

Suggestion To thank Quote Answer

8/21/2023 12:28 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/8/2024 Posts: 5935 Rating: (815)	Hello, maybe you set "Automatically apply encoder values during runtime.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on