Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Break Induction motor

Created by: List at: 3/5/2013 10:23 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/5/2013 10:23 AM	Rate (0)
List Posts: 664 Rating: (17)	Hai All, There is having internal break induction motor[motor break internaly arranged in motor] in siemens?? How its working means how/where the break is applying in motor?? Thanks & Regards, Raj
List Posts: 664 Rating: (17)
Suggestion To thank Quote Answer

3/5/2013 4:06 PM	Rate (0)
DenisMor Posts: 344 Rating: (50)	That depends on the type of Simotics motor. For 1PH7 and 1PH8 motors (Simotics M) brake can be ordered as an option and is mounted on the front (drive end) of the motor. Brake is controlled by terminal contacts on the brake module. Optionally it can also be ordered with a micro switch and a manual release. Please note that the motor brake is a holding brake and not a stopping brake. It is only supposed to be engaged after the motor stops to prevent unwanted movement. It cannot be used to decelerated a running load: it is not designed for that. For brake options and to see how it looks like refer to online CAD Creator tool: http://www.cad-creator.com.
DenisMor Posts: 344 Rating: (50)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on