Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

C230 and Serial devices?

Created by: Ramey at: 1/31/2008 10:18 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/31/2008 10:18 PM	Rate (0)
Ramey Posts: 14 Rating: (0)	I have a Serial device I would like to connect to a C230. It has some Analog, Digital and an LCD display I would need to read/write to. Any good suggestions on a good hardware solution?
Ramey Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

2/1/2008 4:22 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/7/2024 Posts: 22439 Rating: (3029)	Hi, the only way i know ist an CP340 for serial communication. Hope this helps Regards Christoph

Suggestion To thank Quote Answer

2/1/2008 1:26 PM	Rate (0)
Jerry Posts: 116 Rating: (7)	Possibilities: S7-300 Module CP340 or CP341 Details see: http://support.automation.siemens.com/WW/view/en/27035103(CP340/CP341 with SIMOTION) and: http://support.automation.siemens.com/WW/view/en/1137332(CP340 manual) http://support.automation.siemens.com/WW/view/en/1117397(CP341 manual) Another possibility is ET 200S serial interface (if you use ET 200S in your configuration) http://support.automation.siemens.com/WW/view/en/27032924(ET 200S SI with SIMOTION) http://support.automation.siemens.com/WW/view/en/9260793(ET 200S SI manual) You'll finde programmming examples on the utilities & aplication CD, which is delivered with SCOUT. Moreover you'll find the documentation in the SCOUT online help function (V4.1, SP1) Best regards Jerry
Jerry Posts: 116 Rating: (7)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on