Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how can i connect simotion to y-link?

Created by: BINMAN at: 3/31/2008 8:59 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

3/31/2008 8:59 AM	Rate (0)
BINMAN Posts: 9 Rating: (0)	dear all, how can i connect simotion to y-link?whether it use the gsd file?
BINMAN Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

3/31/2008 11:49 AM	Rate (1)
ThomasD Posts: 39 Rating: (9)	Hello BINMAN You can connect the DP-Interface as I-slave to the Y-link. - You must configure the provided Simotion DP-Interface as I-Slave in the HW-Configuration. - The coupling to the Y-link is only possible by GSD file. You will find the GSD-files for the different SIMOTION controllers on the SCOUT CD. Regards ThomasD
ThomasD Posts: 39 Rating: (9)
Suggestion To thank Quote Answer

4/1/2008 9:05 AM	Rate (0)
BINMAN Posts: 9 Rating: (0)	hello ThomasD, thank you for your davice,thank you very much
BINMAN Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on