Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

parameters in 840D

Created by: Markus Klein at: 2/26/2007 8:58 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/26/2007 8:58 PM	Rate (0)
Markus Klein Posts: 1 Rating: (0)	I appologise ahead for bad spelling... anyway. I'm trying to make a little program at work but I've ran in to a problem. In the beginning of my program I define 6 LUD:s, example: DEF BOOL BRUNN_1==0 The idea is tomanually switch the value of this LUD to "1" and the program will do a coupple of extra operations. Now... if the LUD is set to "1" I want a certain parameter (R101) to be automaticly set to "6" and I tried to do this by typing this line in my program: IF BRUNN_1==1 DO R101=6 But it didn't work, I got an alarm when I simulated the program and I'm guessing it's the command "DO" that is wrong. Does anybody know what command I should use or how should type in my program. /Markus
Markus Klein Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/26/2007 10:06 PM	Rate (0)
tomas94 Bronze Member Joined: 10/2/2005 Last visit: 10/23/2024 Posts: 32 Rating: (1)	Try to use this following sequence. IF BRUNN_1==1 R101=6 ENDIF Regards Tomas

Suggestion To thank Quote Answer

2/27/2007 11:29 AM	Rate (0)
Pee Ell Sea Posts: 672 Rating: (57)	Hi, It looks like you have read the information for using synchronous actions which is different to the normal IF statements. The previous reply will work for you but for a better understanding look here:- https://www.automation.siemens.com/doconweb/pdf/SINUMERIK_0107_E/PGA.pdf?p=55#page=55&view=FitBH,0&pagemode=none regards
Pee Ell Sea Posts: 672 Rating: (57)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on