Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Selection of CPU

Created by: Jigs_C at: 11/15/2008 12:03 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

11/15/2008 12:03 PM	Rate (0)
Jigs_C Posts: 33 Rating: (1)	Hi Friends, can any one please explain the criterias for how to choose the CPU? I mean what parameters I should be looking at before deciding on the type of PLC and then CPU number? Is there any manual where I can learn about this? Thanks
Jigs_C Posts: 33 Rating: (1)
Suggestion To thank Quote Answer

11/15/2008 1:18 PM	Rate (0)
dchartier Grandmaster Joined: 9/27/2006 Last visit: 11/18/2024 Posts: 12296 Rating: (2691)	Hello Jigs_C; You select a CPU based on the size of the work memory that it can handle, the amount of I/O [digital and analog] it supports, the on-board communication interfaces it presents... There are many ways of getting this type of information, the HWConfig editor shows details of every CPU you wish to select in your configuration, the A&D Mall is an on-line catalog that you can access on the web. The Product Support (see the link at the top of this page) allows you access to all manuals from A&D (Siemens' automation and drives division). The following manual has 2 chapters on the technical specifications of the standard and compact CPUs; http://support.automation.siemens.com/WW/view/en/12996906 Hope this helps, Daniel Chartier
	Last edited by: dchartier at: 11/15/2008 1:20 PM
Suggestion To thank Quote Answer

11/28/2008 2:11 PM	Rate (0)
DaveA Advanced Member Joined: 8/8/2008 Last visit: 8/2/2024 Posts: 78 Rating: (4)	I agree, it totally depends on how much memory your going to use. If you search the A&D site i think theres a diagram of memory useage to selection of CPU somewhere. Theresonein the Simatics Brouchure as I have it infront of me.You can order onefrom the site.
	Last edited by: DaveA at: 11/28/2008 2:11 PM
Suggestion To thank Quote Answer

3/7/2009 12:27 PM	Rate (0)
Eastern Posts: 557 Rating: (64)	hi Before going to cpu selection u should have a following idea. 1) load memory utilization 2) word memory utilization 3) input output utilization 4) timer counter utilization 5)If commuinication required with other device 6) intelligent device these information is required to match with the performence data of cpu. regards vivek
Eastern Posts: 557 Rating: (64)
Suggestion To thank Quote Answer

3/17/2009 6:39 AM	Rate (0)
Mircea Posts: 16 Rating: (0)	Hi! You can try to use the catalog ST 70 from the following link or to order from local Siemens partners: http://www.automation.siemens.com/infocenter/order_form.aspx?tab=1&nodekey=key_516907&lang=en Best regards! Venix
Mircea Posts: 16 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on