Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinumerik ONE alarm text no available

Created by: marekdti at: 2/21/2024 9:16 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

2/21/2024 9:16 AM	Rate (0)
marekdti Member Joined: 6/10/2022 Last visit: 8/21/2024 Posts: 3 Rating: (0)	Hi, I have this problem with Sinumerik ONE HMI where the displayed info only says "2000041 <no text available>". I know it's related to a connected G120 drive because the message disappears when the power to G120 is turned on. The Sinumerik ONE NCU 1760 and G120 drives are connected by Profinet. Is there any way to edit these message so that the maintenance is able to actually read what the problem is from the alarm display? Attachment alarm problem.jpeg (318 Downloads)

Suggestion To thank Quote Answer

2/22/2024 3:05 AM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 11/11/2024 Posts: 4072 Rating: (357)	What is your role for the machine? You are machine builder, end user? there should be related level of documentation for your questions as SINUMRIK one still new for most of us, if you have documentation you can check by yourself, if you are the user, please ask machine builder or you are machine builder please ask Siemens sales person
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

2/22/2024 6:08 AM	Rate (0)
marekdti Member Joined: 6/10/2022 Last visit: 8/21/2024 Posts: 3 Rating: (0)	Hi, I am the machine builder. Do you have any helpful links to the documentation related to editing alarm in Sinumerik ONE?

Suggestion To thank Quote Answer

2/22/2024 10:57 AM	Rate (0)
Luke_N Bronze Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 361 Rating: (38)	Hi Have you exported the system based alarm texts from within the TIA project and added the generated file to your operate install? Please see Page 70 of the below manual: https://support.industry.siemens.com/cs/us/en/view/109925844 If you have already configured alarms text ensure you import them into the TIA project before carrying this out (details listed in the manual). Hope this helps Luke
	Last edited by: The Helping Hand at: 02/22/2024 11:27:17 Link optimized
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users nulizhang

10/15/2024 5:37 AM	Rate (0)
AutoGen_3135496 Joined: 5/3/2024 Last visit: 10/16/2024 Posts: 1 Rating: (0)	Hi I have the same problem , how to you slove it Attachment 2400065.PNG (41 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on