Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

STEP 7 Missing Hardware

Created by: Maniu_Polaris at: 5/21/2024 9:39 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/21/2024 9:39 AM	Rate (0)
Maniu_Polaris Member Joined: 3/21/2022 Last visit: 10/18/2024 Posts: 6 Rating: (0)	Hi, i try to change some settings in HW. While opening comes a warning MSG (screens). I want to install missing componenets, but cant select a checbox. The communications say: "Selection not possible. Cannot install over a HW update supplied with the STEP vesrion" (screen) Number 2045, 2071 need 5.4/5.5 version. I have STEP 7 V5.7+SP2 version. What shoud i do to be able installing missing components? ADD.: + s7 disturbed safety Programing v5.4+sp5 + s7 f configuration Pack v5.4+sp5 My WINDOWS: Windows 11 IoT Enterprise Attachment 0.jpg (294 Downloads)

Suggestion To thank

5/21/2024 9:47 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 11/8/2024 Posts: 4022 Rating: (602)	Hi, please check you 1st post.... https://support.industry.siemens.com/forum/de/en/posts/step-7-missing-hardware/317179/?page=0&pageSize=10
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank

5/21/2024 10:39 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	Closed cause question posted twice. The second thread with the subject STEP 7 Missing Hardware is published within the conference STEP 7 / STEP 7 Lite. Best regards, Jen_Moderator

Suggestion To thank

|

Share this page:

Share this page on...

Follow us on