Hello,

the D435 you use can't be updated to Version V4.4 .
The Latest FW for this device is V4.3 SP1 HF23!
You can download the FW here:

https://support.industry.siemens.com/cs/de/en/view/31045047

Regards

Christoph

Hi,

ok if you use the device tool to create the update data you need the FWSP installed.
The FWSP Setup can download here:

https://support.industry.siemens.com/cs/de/en/view/33119786

The first link is the FW only, normaly extract the downloaded FW Zip File to the Root of a empty SIMOTION CF Card and put it in the CPU , the new FW is now loading at bootup from the CF Card.

Note that you must also change the Version of the CPU in the project to V4.3 !

To do that open HWConfig and select the D435 V4.3 in thew HW Catalog and Drag&Drop it on the Rack of the D435 Station.
Alternativly select the Rack of the the D435 V4.2 then right Mouse Click -> change device.

If you don't update the CPU Version in the project then the device Tool can create the data for V4.3 and you can't work with the project if FW V4.3 isz on the CPU.

I think is better you check if the Proxy init is working in you chase with Version of CPU V4.3.
To do that:
Save your project with other name
Update the CPU to Version V4.3
After the device change save and recompile the project
Now use this project to initialize the Proxy in TIA

If the proxy work then you can update to Version V4.3 the real CPU.

Regards

Christoph

Hello,

open the properties of the library.

in the tab TP/TO select the then New Version (V4.3) with the same settings like the V4.2 always have.

Regards

Christoph