Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

multiple timers on one output

Created by: michel-zeeland at: 3/17/2009 9:01 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/17/2009 9:01 AM	Rate (0)
michel-zeeland Posts: 2 Rating: (0)	Hi, I'm trying to get a setup working with a change of the on/off time on one output. For testing purposes we need a "complex" timing like: 120sec on, 2 sec off, 150 sec on, 10 sec off, 90 sec on, 12 sec off, 100 sec on, 170 sec off. All timers should be connected to one output. Is this possible and how? please help or advice! regards, Michel
michel-zeeland Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

3/17/2009 11:12 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, Yes. Put a OR between your timer and the output.
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

3/17/2009 11:33 AM	Rate (0)
michel-zeeland Posts: 2 Rating: (0)	Hi, Thanks, but what I mean is the following. The 4 timers has to run in a sequence. First timer 1 (with for instance 150sec on, 10 sec off) than timer 2 (with 100sec on and 20 sec off) etc. All has to go to one output (so all connected to Q1). with an OR gate, zero won't pass through.... thanks again! Michel
michel-zeeland Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

3/19/2009 5:17 PM	Rate (0)
cdrshort Bronze Member Joined: 9/6/2008 Last visit: 3/29/2024 Posts: 134 Rating: (16)	Try this if it helps you Attachment 4 timers loop.zip (658 Downloads)
	http://electrotech-techblogg.blogspot.gr/
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on