Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TP070

Created by: Igorr at: 2/24/2006 1:48 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/24/2006 1:48 AM	Rate (0)
Igorr Posts: 2 Rating: (0)	what I must make to use two TP070 with a S7-200?
Igorr Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/24/2006 8:49 AM	Rate (0)
Damir Posts: 2 Rating: (0)	TP070 isn`t mutlimaster capable, only single point to point. In this case you would require a CPU with 2x ports and none of them are used for anoter things like TD200 or PC(Microwin) programming. Otherwise takethe newerTP170micro which support multimaster.
Damir Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/24/2006 12:27 PM	Rate (0)
Igorr Posts: 2 Rating: (0)	Icould use one in each port?
Igorr Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/26/2006 12:07 AM	Rate (0)
Thumper Posts: 62 Rating: (19)	Greetings Igorr, Yes you can as long as you change the addresses on the second port of the PLC and in the TP070. It's hidden under communications in TP Designer and under the System parameters in MicroWin. Best Regards, Thumper
Thumper Posts: 62 Rating: (19)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on