Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

RF160C configuration with RF 240R reader

Created by: AutoGen_9257261 at: 5/4/2017 9:28 AM (3 Replies)

Rating (1)

Thanks 1

4 Entries

5/4/2017 9:28 AM	Rate (0)
AutoGen_9257261 Posts: 8 Rating: (0)	Hi all, We are trying to configure our RF reader with sinumerik 840DSL (720.3 hardware with inbuilt S7300 317 CPU) and following RF components are used . We are using standard library given in the following application example for configuring the RFID. https://support.industry.siemens.com/cs/document/63969277/simple-communication-between-simatic-rf160c-and-simatic-s7-controllers?dti=0&lc=en-US After configuration we are trying to reset the RF160C but its giving error ( error code : 1500). We assume that error might be the problem with the RF parameters because all the hardware is new. We got only one RFID reader so we left X2 port of RF160C as open, Is there any problem with that?? do we want to terminate the X2 port with a terminator?? It will be helpful if someone share some sample project with S7 300 (step 7). Regards / Alfin Paul
AutoGen_9257261 Posts: 8 Rating: (0)	Last edited by: AutoGen_9257261 at: 5/4/2017 9:32:23 AM
Suggestion To thank Quote Answer

5/5/2017 11:32 AM	Rate (1)
Owei Gold Expert Joined: 10/1/2013 Last visit: 5/8/2024 Posts: 605 Rating: (71)	Hi, is there any reason for using the RF160C? For PROFIBUS communication you should use the ASM456. For this one I could submit a application example for your needs. It's hard to determine the cause of error 1500. There is no such error listed in the documentation of your application example. :( /edit: There is no problem by not using the second port of the communication module. Just leave it unplugged.
	Last edited by: Owei at: 5/5/2017 11:33:10 AM Last edited by: Owei at: 5/5/2017 11:34:44 AM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_9257261

5/26/2017 6:20 AM	Rate (0)
AutoGen_9257261 Posts: 8 Rating: (0)	Hi We got ASM 456 module and we are trying on it.Can u plz send the application example for reference. RRegards / Alfin
AutoGen_9257261 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

6/1/2017 2:15 PM	Rate (0)
Owei Gold Expert Joined: 10/1/2013 Last visit: 5/8/2024 Posts: 605 Rating: (71)	There you go: https://support.industry.siemens.com/cs/ww/en/view/109483364

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on